|
|
Alkyd Enamel Aerosol Spray Paints 340g![]() These bright, lead-free colours are fade resistant. It is an air dry thermosetting enamel that can be used for a wide range of applications on wood, metal and fibreglass. Touch Dry Time: 5-9 [Minutes] Tack Free Dry Time: 20-30 [Minutes] Hard Dry Time: 15-15 [Hours] Full Cure Dry Time: 48-48 [Hours] Tech: An alkyd based paint whose vehicle is comprised of sort-oil block polymers. Special Instructions: "Apply only to a clean, dry surface free from grease, wax, rust, etc. On previously painted surfaces, test spray in a small inconspicuous area. Hold can 8"" to 12"" from surface. Spray in short, overlapping strokes to obtain even coverage. Do not use a continuous spray. It is better to apply two light coats than one heavy coat. Spray second coat within ˝ hour or wait 48 hours for the paint to fully cure. If you miss the ˝ hour “window”, the second coat may cause the paint to react and leave the paint with an “orange peel” effect."
NOTE: The colour samples seen on a website may vary from PC to PC, with different monitors and video cards. If what you require isn't mentioned just call, fax or use the On-line Form. | |
|
Our Specials Our Assortments Bins, Drawers and Storage Liquid & Chemical Products Quick Order Form Store Information Bin-stocking Service Products at a Glance Terms and Conditions About us & Contact us Website Info Home Page |
|
[ Top of Page ] ©2007 Facca Fasteners Limited. All Rights Reserved. |